Bond Firmly. Remove Cleanly.  Residue-Free Temporary Bonding with DuploCOLL® 59330

DuploCOLL® 59330 – the asymmetric foam tape engineered for applications where strong initial adhesion and clean, residue-free removal are both non-negotiable.

In adhesive bonding, most tapes are designed to hold permanently. But there is a growing class of applications where the opposite is equally important: the bond must be strong enough to work reliably – and clean enough to disappear completely when the job is done. DuploCOLL® 59330 was built for exactly this space.

The Challenge: Strong Bond Today, Clean Surface Tomorrow

Temporary bonding applications place contradictory demands on adhesive technology. On one side, you need real adhesion – enough initial tack to hold materials firmly in place during processing, lamination, or protection. On the other, you need guaranteed residue-free removal – without damaging the substrate surface or leaving adhesive traces behind.

The Solution: DuploCOLL® 59330

DuploCOLL® 59330 is an asymmetric double-sided tape built around a colourless PET carrier.

Its two sides are intentionally different – and that asymmetry is the point.

Key performance characteristics:

• Easy removal without residues – the closed side releases cleanly from substrates even after days, weeks, or months of bonding

• High initial tack on the open side – strong, immediate adhesion to the bonding substrate from first contact

• Suitable for one-sided removable bonds – combines permanent-style performance on one side with clean removability on the other

• Stable under temperature stress – validated performance both under standard conditions (23 °C) and after accelerated aging at elevated temperature (60 °C), with no residue transfer in either case

• Available as rolls – for straightforward integration into production processes
  

Validated Performance – Under Standard and Accelerated Conditions

DuploCOLL® 59330 has been benchmarked under both standard laboratory conditions and elevated temperature aging. In both scenarios, the open side maintains strong adhesion to various surfaces after short curing times. The closed side consistently releases residue-free – whether the bond has been in place for days, weeks, or months.

This thermal stability is critical for real-world applications where bonded assemblies may be stored or transported in warm conditions before removal.

Where DuploCOLL® 59330 Works

The asymmetric adhesive design opens up a range of applications where temporary, residue-free bonding is essential:

• Temporary Floor Protection Protective coverings for floors during construction or renovation phases need to adhere reliably during work – and peel off cleanly once the project is complete.

• Cork Lamination Laminating cork to textiles, foams, or damping materials in a process that may require repositioning or clean separation at a later stage.

• Protective Pads – Window Industry Self-adhesive protective pads applied to window profiles or glass during transport and installation, requiring secure hold and guaranteed residue-free removal.

• DIY Market Consumer-facing applications where ease of use, reliable hold, and clean removal are the core value proposition.

One Asymmetric Tape. Multiple Applications.

What unites all these use cases is a shared requirement: performance during bonding, cleanliness after removal. DuploCOLL® 59330 delivers both – without compromise.

Bond Firmly.
Remove Cleanly.
Zero Residues.

Want to find out if DuploCOLL® 59330 is right for your application?
Our experts are ready to support you.